: Use the arrow keys on the cutter's control panel to move the blade to your starting point and press "Origin" or "Local" to set the zero point.

: Download the "MH series USB driver" (often listed as

: Place your vinyl under the pinch rollers and lock them down.

model and choose "Direct USB" or "Direct COM" depending on your cable. 4. Running Your First Cut

Insert the blade into the blade holder (cartridge) and adjust the cap so only a tiny sliver of the blade (about half the thickness of a credit card) is visible.

recommend using a serial connection or a high-quality adapter like the for better reliability. 2. Driver Installation

721-.rar Direct

: Use the arrow keys on the cutter's control panel to move the blade to your starting point and press "Origin" or "Local" to set the zero point.

: Download the "MH series USB driver" (often listed as 721-.rar

: Place your vinyl under the pinch rollers and lock them down. : Use the arrow keys on the cutter's

model and choose "Direct USB" or "Direct COM" depending on your cable. 4. Running Your First Cut 721-.rar

Insert the blade into the blade holder (cartridge) and adjust the cap so only a tiny sliver of the blade (about half the thickness of a credit card) is visible.

recommend using a serial connection or a high-quality adapter like the for better reliability. 2. Driver Installation