A_feladat_1_start.pkt -

Refer to the "Addressing Table" provided within the lab instructions to assign addresses.

: Use the ping command from a PC's command prompt to test connectivity to other devices. 4. Troubleshooting Checklist If connectivity fails (pings do not succeed): A_feladat_1_start.pkt

: If routers cannot see all networks, add routes using the ip route [Destination Network] [Mask] [Next-Hop IP] command. Refer to the "Addressing Table" provided within the

Every router and switch in the topology typically requires these initial settings: Routing and Connectivity : Disable DNS lookup (

: On switches, configure interface vlan 1 with an IP address and no shutdown . 3. Routing and Connectivity

: Disable DNS lookup ( no ip domain-lookup ) and encrypt plain-text passwords ( service password-encryption ).

Console password: line con 0 , then password cisco and login . VTY lines: line vty 0 4 , then password cisco and login .