F-22 Raptor Paper Airplane Folding Instructions • Premium

The Lockheed Martin F-22 Raptor is the world’s premier stealth fighter, known for its sleek lines and unmatched agility. While you might not have a multi-billion dollar budget, you can bring a piece of that engineering marvel to your desk with just a single sheet of paper.

Fold the very ends of the wings upward (about half an inch) to create vertical fins. For a true Raptor look, angle these slightly outward rather than straight up. Pro-Flight Tips

This design focuses on the Raptor’s iconic and twin vertical stabilizers . Let’s get folding! What You’ll Need Paper: A standard 8.5" x 11" sheet (Letter) or A4. F-22 Raptor Paper Airplane Folding Instructions

Fold the top corners down to the center once more. You will see a small triangular "tab" sticking out from under these folds.

Sharp creases are the secret to a high-performance plane. The Lockheed Martin F-22 Raptor is the world’s

If one wing is even slightly higher than the other, your Raptor will spiral. Ensure both sides are mirror images.

Flip the plane over and fold it in half along your original center crease. The "locking tab" should be on the outside. For a true Raptor look, angle these slightly

Fold the wings down. To get the F-22 look, fold them at a slight angle so the wing tips are wider at the back than at the front. Leave about an inch of the paper in the center to serve as the fuselage (handle) .