I2c Overview May 2026

Data is sent in 8-bit bytes, most significant bit first, with each byte followed by an ACK/NACK bit.

The master pulls the SDA line low while SCL remains high. I2C Overview

SDA and SCL are connected to a voltage source via pull-up resistors, allowing devices to pull the lines low without creating short circuits. Data is sent in 8-bit bytes, most significant

I2C (Inter-Integrated Circuit), often pronounced "eye-squared-see" or "eye-two-see," is a popular, synchronous, multi-master/multi-slave communication protocol invented in 1982 by Philips Semiconductors (now NXP). It is used for short-distance, intra-board communication between a processor and low-speed peripherals such as sensors, LCDs, and memory chips. Its hallmark is using only two wires for communication, making it highly efficient for managing multiple devices on a single bus. The master sends the 7-bit unique address of

The master sends the 7-bit unique address of the target slave, followed by a R/W bit (0 for write, 1 for read).