Mastercam 2017 For Solidworks Tutorial (lathe) -

Make sure your X-coordinates go slightly past the center point (e.g., X -0.05) to ensure the part actually drops off without leaving a "stub." 6. Verify and Post Never send code to the machine without checking it first.

Before you click a single toolpath button, make sure your environment is set up: Mastercam 2017 for SOLIDWORKS Tutorial (Lathe)

Since you are inside SOLIDWORKS, you can use the Manager Tree to select the edges of your model. Mastercam 2017 is great at "seeing" the profile of your solid. Make sure your X-coordinates go slightly past the

Mastercam 2017 for SOLIDWORKS: Your Quick Guide to Lathe Programming Mastercam 2017 is great at "seeing" the profile

In turning, your Z-axis must be the centerline of the part, and the X-axis is your diameter. Mastercam usually handles this, but it’s worth double-checking that your SOLIDWORKS Top or Right plane aligns with your machine's orientation. 2. Define Your Machine and Stock

Go to Tools > Add-ins and ensure Mastercam 2017 is checked.