Nad Phono Preamp Pp2 Manual May 2026

: Use RCA cables to connect the PP 2 Output to a Line-Level input (e.g., CD, AUX, Tuner) on your receiver.

Plug your turntable's RCA leads into the or MM inputs on the back of the PP 2, depending on your cartridge type. Match the colors: Red for Right (R) and White for Left (L).

: Never connect the PP 2 to an input marked "PHONO" on your receiver, as this will cause severe distortion. Nad Phono Preamp Pp2 Manual

: Ensure all equipment is turned off and the PP 2 is disconnected from its power supply. Connect Turntable :

Move the PP 2 away from other equipment (like power transformers) to reduce interference. : Use RCA cables to connect the PP

: Toggle the rear MM/MC switch to match the input you used.

Follow these steps to correctly integrate the PP 2 into your audio system: : Never connect the PP 2 to an

: Verify that the PP 2 is connected to a standard Line-Level input and not a Phono input on your receiver. Phono Preamplifier PP 2 - HiFi Gear